快来看,n8n更新了!每个自动化工程师都应该知道的微服务最佳实践

内容来源:https://blog.n8n.io/microservices-best-practices/
内容总结:
微服务架构将应用拆分为多个独立的小型服务,每个服务负责特定功能,并通过API相互通信。单个服务出现故障时,其他服务 ideally 仍能继续运行,而不会导致整个应用崩溃。这种架构提升了系统的抗故障能力,但前提是这些微服务在设计上具备安全失败的能力。微服务最佳实践有助于控制服务之间的依赖和通信方式,避免某个API故障或数据库不可用引发连锁反应。
明确服务边界
设计微服务时,需要确定一个服务在哪里结束、另一个服务从哪里开始。一个实用的经验法则是围绕独立的业务能力来划定边界。领域驱动设计是一种划定边界的实用方法,它将相关业务逻辑归入限界上下文,即业务中具有自身规则、语言和数据的明确部分。单一职责原则同样适用——每个服务应拥有一个业务能力,而不是与其他服务分担该职责。例如,订单服务可以负责订单创建和每个订单的状态,而支付服务负责扣款和退款。将这些职责分开也使每个服务可以独立部署,因此修改支付逻辑不需要发布应用中不相关的部分。如果不同服务共享同一职责,即使很小的变更也可能迫使你更新API、迁移数据并协调所有相关服务的部署。
在服务间调用中构建韧性
随着服务之间开始相互依赖,服务间通信成为潜在故障面的一部分。一个服务自身可能运行正常,却因为另一个服务超时、拒绝请求或暂时不可用而无法完成任务。在同步通信中,一个服务等待另一个服务响应,因此即使调用方本身工作正常,缓慢的依赖也会拖慢调用方。如果不需要立即响应,异步通信可以减少这种依赖。例如,一个服务可以将工作放入消息队列,供另一个进程在就绪时处理。针对这些故障进行设计是分布式系统韧性的核心部分,即即使某个依赖出现问题,整个系统仍能继续完成其工作。这就是为什么需要使用断路器、重试和舱壁等微服务架构模式,每种模式应对不同的故障模式。
断路器模式
断路器监测重复失败,一旦超过阈值就暂时停止发送请求。它不会反复等待一个不太可能响应的服务,而是让调用方在一段时间内快速失败,并给依赖服务时间恢复。
指数退避重试
有些故障只是暂时的,因此如果服务超时几秒钟,再试一次可能就足以完成请求。重试适用于超时或速率限制等瞬态故障。然而,立即重试会给本已承压的服务增加压力。指数退避通过每次失败后增加延迟来处理这一问题。
舱壁模式
舱壁模式将系统中某个故障部分隔离,防止其消耗其他任务所依赖的资源。例如,如果服务A变得无响应,对服务B和C的请求仍可使用它们自己的资源。
通过API网关路由流量
随着服务数量增长,让客户端直接调用每个微服务会造成协调问题并变得难以管理。每个客户端都必须知道哪个端点处理其对应的请求,而服务的变更可能迫使依赖它的客户端也发生变更。例如,设想一个结账应用必须知道以下所有独立URL:订单、库存、支付、物流服务。如果其中某个服务迁移或更改了API,你可能还需要更新调用它的每个客户端。API网关模式通过为客户端提供单一入口点来解决这一问题。网关接收请求,决定应由哪些服务处理,并将其转发到正确位置。它将系统内部结构隐藏在稳定接口之后,因此你可以更改或重组服务,而无需将每个变更暴露给客户端。网关本身需要持续可用且具备韧性。如果每个请求都经过一个网关,该实例可能成为新的单点故障。你可以通过使用多实例或多区域,并使用负载均衡在一个网关不可用时将流量导向另一个网关来应对。
让故障在整个系统中可观测
在微服务架构中定位故障源变得具有挑战性,因为一个请求在最终错误被发现之前可能经过多个独立运行的服务。例如,如果结账请求经过库存、支付和履约,最终失败并不能立即告诉你哪个服务导致了故障,或者数据沿途发生了什么。在单体架构中,大部分应用逻辑运行在一个较大的应用内,你通常可以从一组日志中追踪问题。在微服务中,你可以使用分布式追踪跨服务跟踪同一请求,并使用集中式日志将各服务的独立日志汇集到一个可搜索的数据存储中。
n8n是一个AI原生、源码可用的工作流自动化平台,可以在可视化工作流中编排跨API和服务的调用,并在需要自定义逻辑时提供代码。n8n可以帮助提升项目微服务的可见性。例如,在收到Redis事件后,n8n检查各服务是否在可接受的错误率范围内运行。如果是,则依次调用两个相关微服务并删除Redis键。如果其中一个微服务失败,则递增错误键:如果在预定义的TTL内错误过多,工作流将以错误停止。它为其编排的部分流程提供可见性。在执行视图中,你可以检查以前的工作流运行,跟踪执行所走的路径,并检查每个节点的输入和输出,以查看数据在哪里发生了变化或调用在哪里失败。你还可以将以前执行的数据加载回编辑器中进行调试和重新运行。
使用n8n将韧性融入架构
韧性在你主动为故障进行设计时最为有效。这意味着需要决定服务如何通信、故障应在哪里停止,以及当请求未按预期完成时你将如何识别和理解发生了什么。n8n可以通过在你的服务调用周围提供可见的编排层来补充该架构。你的微服务仍然拥有其业务逻辑和基础设施韧性,而n8n通过HTTP调用、分支、重试和适当的故障处理来协调它们之间的工作流。随着这些依赖关系增长,探索n8n关于事件驱动微服务的指南可能会有所帮助。
中文翻译:
微服务架构将应用程序拆分为多个小型、独立的服务,每个服务负责特定的功能,并通过API进行通信。如果某个服务发生故障,理想情况下其他服务仍能继续运行,而不会导致整个应用崩溃。这种架构使系统更具抗故障能力,但前提是这些微服务在设计时就考虑了安全失败机制。
微服务最佳实践可以帮助你控制服务之间的依赖关系和通信方式,从而避免某个API故障或数据库不可用引发连锁反应。
定义清晰的服务边界
在设计微服务时,需要确定一个服务在哪里结束、另一个服务从哪里开始。一个实用的经验法则是围绕独立的业务能力来划定这些边界。
领域驱动设计是一种划定边界的实用方法。它将相关的业务逻辑归入一个限界上下文,即业务中具有自身规则、语言和数据的特定部分。单一职责原则同样适用——每个服务应负责一项业务能力,而不是与其他服务分担该职责。
例如,订单服务可以负责订单创建和每个订单的状态,而支付服务则处理扣款和退款。将這些职责分开还使每个服务可以独立部署,因此修改支付逻辑不需要你发布应用中不相关的部分。
如果不同服务共享同一职责,即使是很小的改动也可能迫使你更新API、迁移数据,并在所有相关服务之间协调部署。
在服务间调用中构建韧性
当服务开始相互依赖时,服务间通信就成为潜在故障面的一部分。一个服务自身可能运行正常,却因为另一个服务超时、拒绝请求或暂时不可用而无法完成任务。
在同步通信中,一个服务需要等待另一个服务响应,因此即使调用方本身工作正常,一个响应缓慢的依赖也可能拖延迟调用方。如果你不需要立即响应,异步通信可以减少这种依赖。例如,一个服务可以将任务放入消息队列,供另一个进程在就绪时处理。
针对这些故障进行设计是分布式系统韧性的核心部分,即即使某个依赖出现问题,整个系统仍能继续完成其工作。这就是你需要使用断路器、重试和舱壁等微服务架构模式的原因。每种模式应对不同的故障模式。
断路器模式
断路器监控重复出现的故障,一旦超过阈值就暂时停止发送请求。它不会反复等待一个不太可能响应的服务,而是让调用方在一段时间内快速失败,给依赖服务时间恢复。
带指数退避的重试
有些故障只是暂时的,因此如果一个服务超时几秒钟,再试一次可能就足以完成请求。重试适用于瞬态故障,如超时或速率限制。然而,立即重试可能会给已经吃力的服务增加压力。
指数退避通过在每个失败尝试后增加延迟来处理这个问题。
舱壁模式
舱壁模式将系统中某个故障部分隔离出来,防止它消耗其他任务所依赖的资源。例如,如果服务A变得无响应,对服务B和C的请求仍然可以使用它们自己的资源。
通过API网关路由流量
随着服务数量增长,让客户端直接调用每个微服务可能会造成协调问题,并变得难以管理。每个客户端都必须知道哪个端点处理对应的请求,而服务的变更可能迫使依赖它的客户端也跟着变更。
例如,想象一个结账应用必须知道以下所有独立URL:
- 订单
- 库存
- 支付
- 配送服务
如果其中某个服务迁移了位置或更改了API,你可能还需要更新所有调用它的客户端。
API网关模式通过为客户端提供单一入口点来解决这个问题。网关接收请求,决定哪些服务应处理该请求,并将其转发到正确的位置。它将系统的内部结构隐藏在稳定的接口之后,这样你可以更改或重组服务,而不必向客户端暴露每一处变更。
网关本身需要持续可用且具备韧性。如果每个请求都经过一个网关,该实例可能成为新的单点故障。你可以通过使用多个实例或区域,并利用负载均衡在一个网关不可用时将流量引导到另一个网关来解决这个问题。
让故障在整个系统中可观测
在微服务架构中,定位故障源头变得具有挑战性,因为一个请求在你发现最终错误之前可能经过多个独立运行的服务。例如,如果一个结账请求经过库存、支付和履约服务,末端的故障不会立即告诉你哪个服务导致了问题,或者数据沿途发生了什么。
在单体架构中,大部分应用逻辑运行在一个较大的应用内,你通常可以从一组日志中追踪问题。而在微服务中,你可以使用分布式追踪来跟踪同一请求在不同服务间的流转,并使用集中式日志将各服务的独立日志汇集到一个可搜索的数据存储中。
n8n是一个AI原生的、源码可用的工作流自动化平台,可以在可视化工作流中编排跨API和服务的调用,需要自定义逻辑时也可以使用代码。
n8n可以帮助你提升项目微服务的可见性。例如,在收到Redis事件后,n8n检查各服务是否在可接受的错误率范围内运行。如果是,则依次调用两个相关的微服务并删除Redis键。如果其中一个微服务失败,则递增一个错误键:如果在预定义的TTL内错误过多,工作流将以错误状态停止。
它提供了对其所编排流程各部分的可见性。在执行视图中,你可以检查之前的工作流运行记录、追踪某次执行经过的路径,并查看每个节点的输入和输出,以了解数据在哪里发生了变化或调用在哪里失败。你还可以将之前执行的数据加载回编辑器中,进行调试和重新运行。
使用n8n将韧性融入架构
当你主动为故障进行设计时,韧性才能发挥最大效果。这意味着你需要决定服务如何通信、故障应在哪里被阻断,以及当请求未能按预期完成时你将如何识别和理解所发生的情况。
n8n可以通过在服务调用周围提供一个可见的编排层来补充该架构。你的微服务仍然负责自己的业务逻辑和基础设施韧性,而n8n则通过HTTP调用、分支、重试和适当的故障处理来协调它们之间的工作流。
随着这些依赖关系增长,探索n8n的事件驱动微服务指南可能会有所帮助。
英文来源:
A microservices architecture breaks an application into small, independent services that each handle a specific function and communicate through APIs. If one service fails, the others ideally keep running instead of taking down the entire application. It makes systems more failure-resistant, but only if those microservices are designed to fail safely.
Microservices best practices help you control how your services depend on and communicate with each other, so a failed API or unavailable database doesn’t trigger a chain reaction.
Define clear service boundaries
When designing microservices, decide where one service stops and another begins. A useful rule of thumb is to draw those boundaries around a distinct business capability.
Domain-driven design is a practical approach to draw boundaries. It groups related business logic into a bounded context, or a defined part of the business with its own rules, language, and data. The single responsibility principle is also useful — each service should own one business capability rather than sharing that responsibility with others.
For example, an order service might take care of order creation and each order’s status, while a payment service handles charging and refunds. Keeping those responsibilities separate also makes each service independently deployable, so changing your payment logic doesn’t require you to release unrelated parts of the application.
If different services share the same responsibility, even a small change might force you to update APIs, move data, and coordinate deployments across all of them.
Build resilience into service-to-service calls
As your services start depending on one another, service-to-service communication becomes part of your potential failure surface. A service can be healthy and still fail to complete its task because another one times out, rejects a request, or becomes temporarily unavailable.
With synchronous communication, one service waits for another to respond, so a slow dependency can delay the caller even when the caller itself is working normally. If you don’t need an immediate response, asynchronous communication can reduce that dependency. For example, one service can place work on a message queue for another process when it’s ready.
Designing for these failures is a core part of distributed system resilience, where the wider system can keep doing its job even when one dependency has a problem. That’s why you use microservices architecture patterns like circuit breakers, retries, and bulkheads. Each addresses a different failure mode.
Circuit breaker pattern
A circuit breaker watches for repeated failures and temporarily stops sending requests once they cross a threshold. It doesn’t repeatedly wait for a service that’s unlikely to respond, but instead it lets the caller fail fast for a period and gives the dependency time to recover.
Retry with exponential backoff
Some failures are only temporary, so if a service times out for a few seconds, trying again may be enough to complete the request. Retries make sense for transient faults, like timeouts or rate limits. However, retrying immediately can put pressure on a struggling service.
Exponential backoff handles this by increasing the delay after each failed attempt.
Bulkhead pattern
A bulkhead pattern isolates one failing part of your system and prevents it from consuming resources that other tasks depend on. For example, if Service A becomes unresponsive, requests to Services B and C can still use their own resources.
Route traffic through an API gateway
As your service count grows, letting clients call each microservice directly can create coordination issues and become difficult to manage. Every client has to know which endpoint handles its corresponding request, and changes to a service can force changes in the clients depending on it.
For example, imagine a checkout app that has to know all the separate URLs for:
- Orders
- Inventory
- Payment
- Shipping services
If one of those services moves or changes its API, you may also have to update every client that calls it.
An API gateway pattern solves this by giving clients one entry point. The gateway receives a request, decides which services should handle it, and forwards it to the right place. It keeps the internal structure of your system behind a stable interface, so you can change or reorganize services without exposing every change to the client.
The gateway needs to be constantly available and resilient itself. If every request passes through one gateway, that instance can become a new single point of failure. You can tackle this by using multiple instances or regions and using load balancing to direct traffic through another gateway if one becomes unavailable.
Make failures observable across the system
Finding the failure source becomes challenging in a microservices architecture because one request can cross multiple independently running services before you notice the final error. For example, if a checkout request moves through inventory, payment, and fulfillment, a failure at the end doesn’t immediately tell you which service caused it or what happened to the data along the way.
In monolithic architecture, where most application logic runs inside one larger app, you can often trace the problem from one set of logs. With microservices, you can use distributed tracing to follow the same request across services and centralized logging to bring their separate logs into one searchable data store.
n8n is an AI-native, source-available workflow automation platform that can orchestrate calls across APIs and services in visual workflows, with code available when you need custom logic.
n8n allows you to improve visibility across your project’s microservices. For example, after receiving a Redis event, n8n checks whether the services work within acceptable error rates. If so, two related microservices are called sequentially and the Redis key is removed. If one of the microservices fails, an Error Key is incremented: If there are too many errors within a pre-defined TTL, the workflow stops with an error.
It offers visibility across parts of the process it orchestrates. In the Executions view, you can inspect previous workflow runs, follow the path an execution took, and check the inputs and outputs at each node to see where data changed or a call failed. You can also load data from a previous execution back into the editor to debug and rerun it.
Make resilience part of the architecture with n8n
Resilience is most effective when you design for failure proactively. That means deciding how your services communicate, where failures should stop, and how you’ll identify and understand what happens when a request doesn’t complete as expected.
n8n can complement that architecture by giving you a visible orchestration layer around your service calls. Your microservices still own their business logic and infrastructural resilience, while n8n coordinates the workflow between them through HTTP calls, branching, retries, and failure handling where appropriate.
As those dependencies grow, it might be helpful to explore n8n’s guide to event-driven microservices.
文章标题:快来看,n8n更新了!每个自动化工程师都应该知道的微服务最佳实践
文章链接:https://news.qimuai.cn/?post=5534
本站文章均为原创,未经授权请勿用于任何商业用途