如何将你的笔记本电脑用作第二台显示器

qimuai 发布于 阅读:56 一手编译

如何将你的笔记本电脑用作第二台显示器

内容来源:https://www.engadget.com/2309277/how-to-use-laptop-second-desktop-monitor/

内容总结:

将闲置笔记本电脑改造成第二显示器,是提升工作效率的实用方法。无论是游戏、办公还是日常浏览网页,增加一块副屏都能让多任务处理更加顺畅。复制模式适合演示场景,扩展模式则能提供更宽广的桌面空间,让标签页一览无余、多任务切换更加便捷。实现这一目标并不一定需要购置新硬件——如果家中恰好有闲置的笔记本电脑,只需进行一些简单设置,就能组建双屏工作环境。

不过,将笔记本改作第二屏幕虽然总体思路直观,却并非插上一根HDMI线就能搞定。用户需要先确认设备兼容性,在有线和无线方案之间做出选择,并调整系统设置以顺利实现屏幕扩展或镜像。以下是针对Windows、Mac和Linux系统的具体操作步骤,以及通过HDMI连接的有线方案。

Windows笔记本如何充当第二显示器

如果主力电脑和备用笔记本均运行Windows 10或11系统,由于系统内置无线投屏工具,扩展或镜像操作相当简便。该功能基于Miracast技术,通过Wi-Fi实现设备间连接,只需简单几步即可完成设置。

具体操作:在备用笔记本上打开“设置”,进入“系统”菜单,点击“投影到此电脑”,然后依次点击“可选功能”“查看功能”,选择“无线显示器”进行安装。安装完成后返回同一页面,将选项设为“所有位置都可用”,并打开“无线显示器”应用。

随后即可进行镜像或扩展。在主力电脑上按下Windows键+K,从可用显示器列表中选择备用笔记本,输入PIN码并允许键盘和鼠标输入。用户可以选择复制屏幕或扩展屏幕,并随时通过Windows键+P切换模式。需要注意的是,此方法要求两台设备均连接Wi-Fi,且可能出现一定延迟。因此,该方案适合演示或整理大量标签页,但对游戏场景而言并非最佳选择。

其他操作系统能否用作第二显示器?

如果两台设备均为Mac,可通过AirPlay进行连接,但前提是MacBook须为2018年或之后的型号。确认设备兼容后,在用作副屏的MacBook上打开“系统设置”,选择“通用”,进入“隔空投送与接力”,开启“隔空投送接收器”,并在“允许隔空投放到”下选择“当前用户”。确保两台MacBook登录同一Apple ID以确保连接顺畅。在主力设备上打开“系统设置”,进入“显示器”,点击下拉菜单中的加号,从列表中选择副屏设备,然后在设置中选择镜像或扩展显示模式。与Windows的Miracast类似,苹果AirPlay通过Wi-Fi运行,可能存在轻微延迟。如需延迟更低的有线方案,请参阅下文HDMI部分。

如果需要在不同操作系统之间连接——无论是Windows电脑与MacBook之间,还是涉及Linux的设备——则需要借助Deskreen等免费开源软件,通过Wi-Fi运行。连接时,确保两台电脑处于同一Wi-Fi网络,在主力设备上下载Deskreen。软件会生成二维码和网址,在备用笔记本的浏览器中打开即可连接。Deskreen默认镜像显示。如需扩展到备用笔记本,则需要在主力电脑的HDMI接口中插入一个廉价的虚拟显示器适配器(俗称“假负载”)。与其他系统一样,通过Wi-Fi连接设备的软件都会存在一定延迟,因此对于游戏或其他对连接流畅度要求较高的场景,建议考虑以下有线方案。

能否通过HDMI线连接设备?

大多数笔记本的HDMI接口仅支持视频输出,因此直接用线缆连接两台设备无法实现屏幕扩展或镜像。解决办法是使用HDMI转USB视频采集卡,将其分别插入两台笔记本。将主力设备的HDMI线插入采集卡,再将采集卡的USB端插入备用笔记本。采集卡将作为网络摄像头运行,用户可在笔记本的相机应用或OBS Studio等免费视频软件中查看画面,后者支持Windows、Mac和Linux系统。

如果用户在玩游戏且没有电视,想连接游戏主机,也可以用同样的方式将PlayStation或Nintendo Switch连接至笔记本。同样可能存在轻微延迟,但通常低于基于Wi-Fi的连接,除非是竞技类游戏玩家,否则一般不会造成明显影响。如果以上用途都不感兴趣,旧笔记本还可以改造成智能家居控制中枢。

中文翻译:

如何将笔记本电脑用作第二台显示器
把设备改造成第二屏幕并不像插上一根HDMI线那么简单,但以下方法确实可行。
无论你是在玩游戏、办公,还是单纯浏览网页,增加一台第二显示器都是升级工作流程的最佳方式之一。镜像显示,即在两块屏幕上显示相同的桌面,在演示时很方便;而扩展显示则能给你一个更宽的桌面。将桌面扩展到额外的屏幕空间,意味着能看到更多标签页、更轻松地多任务处理,以及更高的生产力。但做出这一改变并不一定需要购买一套花哨的设备。如果你家里有一台闲置的笔记本电脑,只需做几处小调整,就能使用双显示器,而不必为新的硬件投入太多。
把笔记本电脑变成第二块屏幕相当直接,但并不一定像插上一根HDMI线那么简单。首先,你需要检查电脑的兼容性,考虑有线还是无线方案,并调整系统上的一些设置,以顺利扩展或镜像显示。那么,究竟该如何把笔记本电脑变成第二台显示器呢?以下是Windows、Mac和Linux的步骤,以及通过HDMI连接的有线方案。
如何将Windows笔记本电脑用作第二台显示器
如果你的主电脑和你想用作第二台显示器的备用笔记本电脑都运行Windows 10或11,那么扩展或镜像它们相当简单,因为这俩操作系统内置了无线投屏工具。这些工具依赖Miracast,这项功能可通过Wi-Fi在设备之间建立连接,只需一个简短的操作流程即可设置。
要启用它,请到你的备用笔记本电脑上,打开“设置”,然后进入“系统”,再进入“投影到此电脑”。点击“可选功能”,然后点击“查看功能”,再选择“无线显示器”以添加它。安装完成后,返回同一页面,将其设置为“在所有位置都可用”,并打开“无线显示器”应用。
现在,你就可以镜像或扩展显示了。在你的主电脑上,按Windows键+K,从可用显示器列表中选择那台备用笔记本电脑,输入PIN码并允许键盘和鼠标输入。然后你可以选择复制屏幕或扩展屏幕,并且可以随时用Windows键+P切换。请记住,这种连接设备的方法需要两台机器都开启Wi-Fi,而且你可能会遇到一些延迟。因此,虽然它非常适合演示或整理大量标签页,但可能不是玩游戏的最佳选择。
我可以使用其他操作系统作为第二台显示器吗?
如果你的两台设备都是Mac,你可以使用AirPlay将两者连接起来,但前提是这台MacBook是2018年或之后的机型。确认你的设备兼容后,转到你想用作第二块屏幕的MacBook上,打开“系统设置”,选择“通用”,然后选择“隔空投送与连续互通”。打开“AirPlay接收器”,然后在“允许AirPlay接收自”下选择“当前用户”。确保两台MacBook都登录同一个Apple ID,以确保连接顺畅。在你的主设备上,打开“系统设置”,然后进入“显示器”,点击下拉菜单中的加号,从列表中选择你的第二台设备。决定你是要镜像还是扩展显示,这可以在设置中选择。和Windows的Miracast一样,Apple的AirPlay通过Wi-Fi工作,因此可能会有轻微延迟。如果想要延迟更小的有线方案,请参阅下面的HDMI部分。
如果要在两个不同的操作系统之间连接,无论是Windows电脑和MacBook之间,还是涉及Linux的任何情况,你都需要像Deskreen这样的软件,这是一款通过Wi-Fi运行的自由开源工具。要连接,请确保两台电脑处于同一Wi-Fi网络,并在主设备上下载Deskreen。Deskreen会提供一个二维码和网址。在备用笔记本电脑的浏览器中打开它,即可连接设备。Deskreen默认镜像显示。要扩展到备用笔记本电脑,你需要在主电脑的HDMI端口插入一个便宜的虚拟显示适配器,也就是“假负载插头”。和其他系统一样,任何通过Wi-Fi连接设备的软件都会有一些延迟,所以如果是玩游戏或其他依赖更流畅连接的活动,请考虑下面的有线方案。
我可以使用HDMI线连接我的设备吗?
大多数笔记本电脑的HDMI端口仅支持视频输出,因此用线把两台设备直接连起来,并不能直接让你扩展或镜像显示。为了解决这个问题,可以买一个HDMI转USB的视频采集卡,把它插到两台笔记本电脑上。将主设备的HDMI线插入采集卡,然后把采集卡的USB端插入备用笔记本电脑。采集卡会作为网络摄像头工作,因此你可以在笔记本电脑的相机应用中查看画面,或使用像OBS Studio这样的免费视频应用,它可在Windows、Mac和Linux上运行。
如果你在玩游戏,并且想在没有电视的情况下玩主机,你可以用同样的方式将PlayStation或Nintendo Switch连接到笔记本电脑。同样,可能会有少量延迟,但通常比基于Wi-Fi的连接更少,而且除非你是竞技类玩家,否则一般不会影响你。如果这些用途都不吸引你,你也可以随时用旧笔记本电脑做一个智能家居中枢。

英文来源:

How to use your laptop as a second monitor
Converting the device is not as easy as simply plugging in an HDMI cord, but here's what does work.
Whether you're gaming, working or simply browsing the web, adding a second monitor is one of the best ways to upgrade your workflow. Mirroring the display, which shows the same desktop on both screens, can be handy for presentations, while extending the display gives you one wider desktop. Extending the desktop into additional screen space means more visible tabs, easier multitasking and increased productivity. But making this change does not necessarily require buying a fancy setup. If you have a spare laptop lying around at home, you can make a few small tweaks to use dual monitors without going all-in on new hardware.
Converting your laptop into a second screen is fairly straightforward but not necessarily as simple as plugging in an HDMI cable. First you need to check your computer's compatibility, consider wired versus wireless options and tweak some settings on your system to smoothly extend or mirror the display. So how, exactly, do you turn your laptop into a second monitor? Here are the steps for Windows, Mac and Linux, as well as wired options via HDMI connections.
How to use a Windows laptop as a second monitor
If both your primary computer and the spare laptop you want to use as a second monitor are running Windows 10 or 11, extending or mirroring them is quite simple due to the operating systems' built-in wireless casting tools. These rely on Miracast, a functionality that enables connections between devices via Wi-Fi and requires only a quick workflow to set up.
To activate it, go to your spare laptop, open Settings, then System, then Projecting to this PC. Click Optional features, then View features, then select Wireless Display to add it. Once it installs, return to the same page and set it to Available everywhere, and open the Wireless Display app.
Now, you're ready to mirror or extend your display. On your main computer, press the Windows key + K, select the spare laptop from the list of available displays, enter the PIN and allow keyboard and mouse input. You can then choose to duplicate your screen or extend it, and you can switch anytime with Windows key + P. Keep in mind, this method of connecting your devices does require Wi-Fi on both machines, and you may experience some lag. Therefore, while it's great for presentations or organizing large numbers of tabs, it may not be the best choice for gaming.
Can I use other operating systems as a second monitor?
If both of your devices are Macs, you can use AirPlay to connect the two, but only if the MacBook is from 2018 or later. Once you've confirmed your device is compatible, go to the MacBook you want to use as the second screen, open System Settings, select General, then AirDrop & Continuity. Turn on AirPlay Receiver and then under Allow AirPlay for, select Current User. Make sure both MacBooks are signed into the same Apple ID to ensure a smooth connection. On your primary device, open System Settings, then Displays and click the plus sign from the dropdown menu to select your secondary device from the list. Decide if you want mirroring or extended display, which can be selected under settings. Like Windows' Miracast, Apple's AirPlay works over Wi-Fi and can thus have a slight delay. For a wired option with less lag, see the HDMI section below.
If connecting between two different operating systems, whether between a Windows PC and a MacBook or anything involving Linux, you will need software like Deskreen, a free, open-source tool that runs on Wi-Fi. To connect, make sure both computers are on the same Wi-Fi network, and download Deskreen on the main device. Deskreen will offer a QR code and URL. Open this on the spare laptop's browser to connect the devices. Deskreen mirrors the display by default. To extend to the spare laptop, you will need a cheap virtual display adaptor, or a "dummy plug," in your main computer's HDMI port. Like the other systems, any software that connects devices over Wi-Fi will have some lag, so consider the wired option below for gaming or other activities that rely on smoother connections.
Can I use an HDMI cable to connect my devices?
Most laptop HDMI ports are video-out only, so plugging two devices together with a cord will not directly allow you to extend or mirror displays. To work around this, get an HDMI-to-USB video capture card, which can be plugged into both laptops. Plug your main device's HDMI cable into the card, then plug the card's USB end into the spare laptop. The capture card will function as a webcam, so you can view the feed in your laptop's camera app or a free video app like OBS Studio, which runs on Windows, Mac and Linux.
If you are gaming and want to play a console without a TV, you can connect a PlayStation or a Nintendo Switch to the laptop in the same way. Again, there may be a small amount of lag but usually less than Wi-Fi-based connections, and it's unlikely to trip you up unless you are a competitive gamer. If none of these uses appeal to you, you can always use your old laptop to make a smart home hub.

Engadget

文章目录


    扫描二维码,在手机上阅读